Up to 08/2009

LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY: INSTALLATION

1. INSTALL LICENSE PLATE LIGHT ASSEMBLY

(a) Engage the 2 claws to install the license plate light assembly.





(b) Connect the connector.

2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY Reassembly

4. INSTALL BACK DOOR SERVICE HOLE COVER LH Reassembly

5. INSTALL BACK DOOR SERVICE HOLE COVER RH Reassembly

6. INSTALL BACK DOOR UPPER TRIM COVER LH Reassembly

7. INSTALL BACK DOOR UPPER TRIM COVER RH Reassembly

8. INSTALL NO. 2 ROOM LIGHT ASSEMBLY Installation

9. INSTALL BACK DOOR LOCK COVER Reassembly

10. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door) Reassembly

11. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door) Reassembly

12. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door) Reassembly

13. INSTALL DOOR PULL HANDLE WITH SWITCH (w/ Power Back Door) Reassembly

14. INSTALL TONNEAU COVER SUB-ASSEMBLY