Up to 08/2009

2GR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: INSTALLATION

1. INSTALL SPARK PLUG

(a) Install the 6 spark plugs.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

2. INSTALL IGNITION COIL ASSEMBLY

(a) Install the 6 ignition coils with the 6 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the 6 ignition coil connectors.

3. INSTALL NO. 1 SURGE TANK STAY Installation

4. INSTALL INTAKE AIR SURGE TANK ASSEMBLY Installation

5. INSTALL AIR CLEANER ASSEMBLY Installation

6. INSTALL BATTERY Installation

7. INSTALL NO. 1 AIR CLEANER INLET Installation

8. INSTALL NO. 2 AIR CLEANER INLET Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. ADD ENGINE COOLANT Service and Repair

11. INSPECT FOR ENGINE COOLANT LEAK Testing and Inspection

12. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

13. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

14. INSTALL FRONT SHOCK ABSORBER CAP (w/ Air Suspension) Installation

15. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Install the windshield wiper motor and link assembly Installation.

16. INSTALL NO. 1 ENGINE UNDER COVER