Up to 08/2009

U660E AUTOMATIC TRANSMISSION / TRANSAXLE: TCM: REMOVAL

NOTICE:
If automatic transmission parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary U660E Automatic Transaxle System.

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE ENGINE ROOM SIDE COVER Removal

3. REMOVE ENGINE ROOM SIDE COVER LH Removal

4. REMOVE COOL AIR INTAKE DUCT SEAL Removal

5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE INLET NO. 2 AIR CLEANER Removal

7. REMOVE INLET NO. 1 AIR CLEANER Removal

8. REMOVE BATTERY Removal

9. REMOVE AIR CLEANER BRACKET

(a) Remove the 3 bolts and air cleaner bracket.





10. REMOVE TCM

(a) Turn the lock lever and disconnect the connector from the TCM.





(b) Remove the 2 bolts and TCM from the transaxle.