Up to 08/2009

MF1A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal

6. REMOVE FRONT DOOR SCUFF PLATE RH Removal

7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

9. REMOVE INSTRUMENT PANEL GARNISH RH Removal

10. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

11. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

12. REMOVE 4WD ECU ASSEMBLY

(a) Disconnect the connector.





(b) Remove the bolt and 4WD ECU assembly.