From 08/2009

2GR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: REMOVAL

1. PRECAUTION (w/ Air Suspension)

NOTICE:
Be sure to read Precaution thoroughly before servicing Suspension Control System.

2. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Remove the windshield wiper motor and link assembly Removal.

4. REMOVE FRONT SHOCK ABSORBER CAP (w/ Air Suspension) Removal

5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

6. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE NO. 2 AIR CLEANER INLET Removal

9. REMOVE NO. 1 AIR CLEANER INLET Removal

10. REMOVE BATTERY Removal

11. REMOVE NO. 1 ENGINE UNDER COVER

12. DRAIN ENGINE COOLANT Service and Repair

13. REMOVE AIR CLEANER ASSEMBLY Removal

14. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

15. REMOVE NO. 1 SURGE TANK STAY Removal

16. REMOVE IGNITION COIL ASSEMBLY

(a) Disconnect the 3 wire harness clamps.

(b) Disconnect the 6 ignition coil connectors.

17. REMOVE SPARK PLUG

(a) Remove the 6 spark plugs.