From 08/2009
AUDIO / VIDEO: REAR SEAT ENTERTAINMENT ECU: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
5. REMOVE NO. 2 CONSOLE BOX DUCT Removal
6. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal
7. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) Removal
8. REMOVE REAR CONSOLE BOX ASSEMBLY Removal
9. REMOVE INSTRUMENT PANEL GARNISH LH Removal
10. REMOVE NO. 1 SWITCH HOLE BASE Removal
11. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal
12. REMOVE INSTRUMENT PANEL FINISH PANEL Removal
13. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal
14. REMOVE CONSOLE BOX Removal
15. REMOVE REAR SEAT ENTERTAINMENT ECU ASSEMBLY
(a) Disengage the 3 clamps.
(b) Disengage the claw and turn back the floor carpet as shown in the illustration.
(c) Disengage the 3 clamps.
(d) Disengage the claw and turn back the floor carpet as shown in the illustration.
(e) w/o Manual (SOS) Switch:
(1) Disconnect the 3 connectors.
(2) Remove the 3 bolts.
(3) Disengage the guide and remove the rear seat entertainment ECU assembly.
(f) w/ Manual (SOS) Switch:
(1) Disconnect the 7 connectors.
(2) Remove the 3 bolts.
(3) Disengage the guide and remove the rear seat entertainment ECU assembly.
16. REMOVE MULTI-DISPLAY CONTROLLER ASSEMBLY WITH BRACKET
(a) Remove the 3 nuts and multi-display controller assembly with bracket.
17. REMOVE NO. 2 MULTI-DISPLAY CONTROLLER BRACKET
(a) Remove the 2 bolts and No. 2 multi-display controller bracket.
18. REMOVE NO. 3 MULTI-DISPLAY CONTROLLER BRACKET
(a) Remove the 2 bolts and No. 3 multi-display controller bracket.
19. REMOVE MULTI-DISPLAY CONTROLLER ASSEMBLY