Up to 08/2009

PARK ASSIST / MONITORING: PARKING ASSIST ECU: INSTALLATION

1. INSTALL PARKING ASSIST ECU

(a) Engage the claw to install the parking assist ECU as shown in the illustration.





2. INSTALL ECU INTEGRATION BOX Installation

3. CONNECT CONNECTOR HOLDER Installation

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL GARNISH RH Installation

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

9. INSTALL FRONT DOOR SCUFF PLATE RH Installation

10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. PARKING ASSIST ECU INITIALIZATION

HINT
If the parking assist ECU is replaced, perform initialization Calibration.

15. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.