From 08/2009

POWER OUTLETS (EXT): TOWING CONVERTER RELAY: INSTALLATION

1. INSTALL TOWING CONVERTER RELAY

(a) Install the towing converter relay with the bolt.





(b) Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH Installation

3. INSTALL HEIGHT CONTROL SWITCH (w/ Air Suspension) Installation

4. INSTALL RECLINING REMOTE CONTROL BEZEL RH

HINT
Use the same procedure for the RH side and the LH side Installation.

5. INSTALL ROPE HOOK ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side Installation.

6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK RH Installation

7. INSTALL REAR SEAT SIDE COVER RH

HINT
Use the same procedure for the RH side and the LH side Installation.

8. INSTALL REAR FLOOR FINISH SIDE PLATE RH

HINT
Use the same procedure for the RH side and the LH side Installation.

9. INSTALL REAR FLOOR FINISH PLATE Installation

10. INSTALL REAR DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and the LH side Installation.

11. INSTALL REAR SEAT ASSEMBLY RH

(a) Install the rear seat assembly RH Installation.

12. INSTALL DECK SIDE TRIM BOX RH (for Compact Spare Tire) Installation

13. INSTALL DECK SIDE TRIM BOX RH (for Full Size Spare Tire) Installation

14. INSTALL NO. 3 REAR FLOOR BOARD (for Compact Spare Tire) Installation

15. INSTALL NO. 3 REAR FLOOR BOARD (for Full Size Spare Tire) Installation

16. INSTALL SPARE WHEEL COVER ASSEMBLY (for Compact Spare Tire) Installation

17. INSTALL DECK BOARD SUB-ASSEMBLY Installation

18. INSTALL TONNEAU COVER ASSEMBLY Installation

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

20. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

(a) Inspect the suspension control system Test Mode Procedure.