From 08/2009

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

4. REMOVE TIRE PRESSURE WARNING ECU

(a) Disengage the 2 claws to remove the tire pressure warning ECU.





HINT
Slide the tire pressure warning ECU towards the rear of the vehicle to remove it.

(b) Disconnect the connector.