From 08/2009

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE ROOF HEADLINING ASSEMBLY

HINT
Refer to the procedures up to "Remove roof headlining assembly" Removal.

4. REMOVE TIRE PRESSURE WARNING RECEIVER

(a) Remove the bolt.





(b) Disconnect the connector to remove the tire pressure warning receiver.