Up to 08/2009

SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR: ON-VEHICLE INSPECTION

CAUTION:
Be sure to follow the correct removal and installation procedures of the seat position sensor.

1. INSPECT SEAT POSITION SENSOR (VEHICLE NOT INVOLVED IN COLLISION)

(a) Perform a diagnostic system check DTC Check / Clear.

2. INSPECT SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

(a) Perform a diagnostic system check DTC Check / Clear.

(b) Visually check for defects with the seat position sensor removed from the vehicle.

(1) The defects are as follows:

* Cracks on the sensor housing

* Dents on the sensor housing

* Chips on the sensor housing

* Cracks or other damage to the connector

OK:

No defects are found.

HINT
If any of the defects is found, replace the seat position sensor with a new one.