Up to 08/2009

DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR: REMOVAL

1. REMOVE TONNEAU COVER SUB-ASSEMBLY

2. REMOVE BACK DOOR TRIM BASE Disassembly

3. REMOVE DOOR PULL HANDLE WITH SWITCH Disassembly

4. REMOVE BACK DOOR LOCK COVER Disassembly

5. REMOVE NO. 2 ROOM LIGHT ASSEMBLY Removal

6. REMOVE BACK DOOR UPPER TRIM COVER LH Disassembly

7. REMOVE BACK DOOR UPPER TRIM COVER RH Disassembly

8. REMOVE BACK DOOR SERVICE HOLE COVER LH Disassembly

9. REMOVE BACK DOOR SERVICE HOLE COVER RH Disassembly

10. REMOVE BACK DOOR TRIM PANEL ASSEMBLY Disassembly

11. REMOVE POWER BACK DOOR TOUCH SENSOR ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 4 screws.

(c) Disengage the clip and remove the power back door touch sensor assembly.