Up to 08/2009

2GR-FE LUBRICATION: OIL PRESSURE SWITCH: REMOVAL

1. PRECAUTION (w/ Air Suspension)

CAUTION:
Be sure to read Precaution thoroughly before service Suspension Control System.

2. REMOVE FRONT WHEEL RH (w/ Oil Cooler)

3. REMOVE NO. 1 ENGINE UNDER COVER (w/o Oil Cooler)

4. REMOVE FRONT FENDER LINER RH (w/ Oil Cooler)

5. REMOVE FRONT FENDER APRON SEAL RH (w/ Oil Cooler) Removal

6. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (w/o Oil Cooler)

(a) Disconnect the oil pressure switch assembly connector.

(b) Using a 24 mm deep socket wrench, remove the oil pressure switch.





7. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (w/ Oil Cooler)

(a) Disconnect the oil pressure switch assembly connector.

(b) Using a 24 mm deep socket wrench, remove the oil pressure switch.