Up to 08/2009

METER / GAUGE / DISPLAY: LIGHT CONTROL RHEOSTAT: INSTALLATION

1. INSTALL LIGHT CONTROL RHEOSTAT

(a) Install the light control rheostat with the 2 screws.





2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL NO. 1 SWITCH HOLE BASE Installation

4. INSTALL INSTRUMENT PANEL GARNISH LH Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

(a) Inspect the suspension control system Test Mode Procedure.