Up to 08/2009

POWER OUTLETS (INT): POWER OUTLET SOCKET: REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

3. REMOVE NO. 2 CONSOLE BOX DUCT Removal

4. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal

5. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) Removal

6. REMOVE REAR CONSOLE BOX ASSEMBLY Removal

7. REMOVE LOWER CONSOLE BOX POCKET Disassembly

8. REMOVE CONSOLE COIN BOX Disassembly

9. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Disassembly

10. REMOVE STEREO JACK ADAPTER ASSEMBLY Removal

11. REMOVE POWER POINT SOCKET ASSEMBLY

(a) Disconnect each connector.





(b) Disengage the 2 clamps.

(c) Using a screwdriver, bend back and break off the 4 claws as shown in the illustration.





HINT
The power point socket cover will not be reused.

(d) Remove the power point socket assembly and power point socket cover in the direction shown in the illustration.

(e) Using a screw driver, disengage the claw and remove the power point socket assembly from the power point socket cover as shown in the illustration.