Up to 08/2009

POWER OUTLETS (INT): INVERTER MAIN SWITCH: REMOVAL

1. PRECAUTION (w/ Air Suspension)

NOTICE:

w/ Navigation System for HDD:

After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE INSTRUMENT PANEL GARNISH LH Removal

4. REMOVE NO. 1 SWITCH HOLE BASE Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

6. REMOVE INVERTER MAIN SWITCH ASSEMBLY

(a) Disengage the 2 claws and remove the inverter main switch assembly.