Auxiliary Power Outlet Switch: Testing and Inspection

POWER OUTLETS (INT): INVERTER MAIN SWITCH: INSPECTION

1. INSPECT MAIN SWITCH ASSEMBLY

(a) Measure the voltage according to the value(s) in the table below.





Standard Voltage:





Text in Illustration





HINT
If the result is not as specified, replace the main switch assembly.

(b) Check the LED illumination.





(1) Disconnect the connector.

(2) Connect a positive (+) lead from the battery to terminal 3 (ILL-) and a negative (-) lead to terminal 6 (ILL+).

(3) Check that the switch illumination comes on.

OK:

Switch illumination comes on.

Text in Illustration





HINT
If the result is not as specified, replace the main switch assembly.