Up to 08/2009

2GR-FE STARTING: STARTER: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal Navigation System (for HDD).

2. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Remove the windshield wiper motor and link assembly Removal.

3. REMOVE FRONT SHOCK ABSORBER CAP (w/ Air Suspension) Removal

4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

6. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. REMOVE NO. 2 AIR CLEANER INLET Removal

8. REMOVE NO. 1 AIR CLEANER INLET Removal

9. REMOVE BATTERY Removal

10. REMOVE AIR CLEANER ASSEMBLY Removal

11. REMOVE AIR CLEANER BRACKET Removal

12. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.





(b) Turn back the terminal cap, remove the nut and disconnect the starter wire.

(c) Remove the 2 bolts and starter.