Up to 08/2009

STEERING COLUMN: TILT AND TELESCOPIC MANUAL SWITCH: INSTALLATION

1. INSTALL TILT AND TELESCOPIC SWITCH

(a) Engage the claw to install the tilt and telescopic switch.





(b) Connect the connector.

2. INSTALL LOWER STEERING COLUMN COVER Installation

3. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Installation

4. INSTALL STEERING WHEEL ASSEMBLY Installation

5. INSTALL STEERING PAD

HINT
Refer to the instructions for Installation of the steering pad Installation.

6. TURN FRONT WHEELS FACING STRAIGHT AHEAD

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
* Make sure that the cable has been disconnected from the battery terminal for at least 2 seconds before reconnecting the cable.
* Connect the cable to the negative (-) battery terminal with the front wheels facing straight ahead.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
8. INSPECT STEERING PAD Installation

9. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.