Up to 08/2009

SUSPENSION CONTROL: HEIGHT CONTROL OFF SWITCH: INSTALLATION

1. INSTALL HEIGHT CONTROL OFF SWITCH

(a) Engage the 2 claws to install the height control OFF switch to the No. 1 instrument panel under cover sub-assembly.





2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Some systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

5. INSPECT SUSPENSION CONTROL SYSTEM

(a) Inspect the suspension control system Test Mode Procedure.