Up to 08/2009

U660F AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSAXLE ASSEMBLY: REMOVAL

NOTICE:
If automatic transmission parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary U660F Automatic Transaxle System.

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

HINT
See the steps from "Precaution" through "Remove Engine Assembly with Transaxle" Removal.

2. REMOVE STARTER ASSEMBLY Removal

3. REMOVE RADIATOR PIPE CLAMP Removal

4. REMOVE NO. 1 FRONT STABILIZER BRACKET LH Removal

5. REMOVE NO. 1 FRONT STABILIZER BRACKET RH Removal

6. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY Removal

7. REMOVE STEERING LINK ASSEMBLY Removal

8. REMOVE FRONT FRAME ASSEMBLY Removal

9. REMOVE MANIFOLD STAY Removal

10. REMOVE TCM Removal

11. SEPARATE WIRE HARNESS

(a) Remove the 2 bolts and disconnect the 2 wire harnesses.





(b) Separate the 2 connector and 6 wire harness clamps.

12. REMOVE TRANSFER STIFFENER PLATE RH Removal

13. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

(a) Remove the 11 bolts and transaxle.





NOTICE:
To prevent damage to the knock pins, do not pry between the transaxle and engine.

14. REMOVE TRANSFER ASSEMBLY Removal

15. REMOVE FRONT ENGINE MOUNTING BRACKET

(a) Remove the 2 bolts, nut and front engine mounting bracket.





(b) Using an E8 "TORX" socket wrench, remove the stud bolt.

Text in Illustration





16. REMOVE WIRE HARNESS CLAMP BRACKET

(a) Remove the 5 bolts and 5 clamp brackets.





17. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET

(a) Remove the 2 bolts and No. 1 transmission control cable bracket from the automatic transaxle assembly.





18. REMOVE SPEEDOMETER DRIVEN HOLE (ATM) COVER SUB-ASSEMBLY

(a) Remove the bolt and speedometer driven hole (ATM) cover sub-assembly from the automatic transaxle assembly.





(b) Remove the O-ring from the speedometer driven hole (ATM) cover sub-assembly.

19. REMOVE TORQUE CONVERTER CLUTCH ASSEMBLY

(a) Remove the torque converter clutch assembly from the automatic transaxle assembly.





20. INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY U660F Automatic Transaxle