Disassembly

U660E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: DISASSEMBLY

1. REMOVE SHIFT LOCK RELEASE BUTTON COVER

(a) Remove the shift lever cap from the floor shift position indicator housing sub-assembly.

2. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY

(a) Remove the 4 screws and floor shift position indicator housing sub-assembly.

3. REMOVE LOWER POSITION INDICATOR HOUSING

(a) Disconnect the indicator light wire harness connector from the floor shift position indicator housing sub-assembly.

Text in Illustration

(b) Disengage the 4 claws to remove the lower position indicator housing.

4. REMOVE SHIFT LOCK RELEASE BUTTON

(a) Remove the shift lock release button and compression spring.

5. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

(a) Remove the indicator light wire sub-assembly from the lower position indicator housing.

6. REMOVE POSITION INDICATOR LIGHT CAP

(a) Remove the position indicator light cap from the position indicator light bulb.

7. REMOVE POSITION INDICATOR LIGHT BULB

(a) Remove the position indicator light bulb from the indicator light wire sub-assembly.

8. REMOVE POSITION INDICATOR LIGHT GUIDE

(a) Disengage the 4 claws and remove the position indicator light guide.

9. REMOVE UPPER POSITION INDICATOR HOUSING

(a) Detach the 4 claws and remove the upper position indicator housing from the lower position indicator housing.

10. REMOVE POSITION INDICATOR SLIDE COVER

(a) Remove the position indicator slide cover from the lower position indicator housing.

11. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

(a) Remove the No. 2 position indicator slide cover from the position indicator slide cover.

12. REMOVE LOWER POSITION INDICATOR HOUSING

(a) Detach the 2 claws and remove the lower position indicator housing from the shift lock control unit assembly.

13. REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY

(a) Disconnect the connector from the shift lock control ECU sub-assembly.

(b) Detach the 3 claws and remove the shift lock control ECU sub-assembly.