Reassembly

U660E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REASSEMBLY

1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY

(a) Engage the 3 claws to install the shift lock control ECU sub-assembly.





(b) Connect the connector.

2. INSTALL LOWER POSITION INDICATOR HOUSING

(a) Put the guide in position and engage the 2 claws to install the lower position indicator housing to the shift lock control unit assembly.





NOTICE:
Make sure that the claws are firmly engaged.

3. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

(a) Install the No. 2 position indicator slide cover to the position indicator slide cover.

4. INSTALL POSITION INDICATOR SLIDE COVER

(a) for TMC made:





(1) Install the position indicator slide cover to the lower position indicator housing as shown in the illustration.

(b) for TMC made:





(1) Install the position indicator slide cover to the lower position indicator housing as shown in the illustration.

5. INSTALL UPPER POSITION INDICATOR HOUSING

(a) Engage the 4 claws to install the upper position indicator housing to the lower position indicator housing.





NOTICE:
Make sure that the claws are firmly engaged.

6. INSTALL POSITION INDICATOR LIGHT GUIDE

(a) Engage the 4 claws to install the position indicator light guide to the lower position indicator housing.





NOTICE:
Make sure that the claws are firmly engaged.

7. INSTALL POSITION INDICATOR LIGHT BULB

(a) Install the position indicator light bulb to the indicator light wire sub-assembly.

8. INSTALL POSITION INDICATOR LIGHT CAP

(a) Install the position indicator light cap to the position indicator light bulb.

9. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

(a) Install the indicator light wire sub-assembly to the lower position indicator housing.





10. INSTALL SHIFT LOCK RELEASE BUTTON

(a) Install the shift lock release button and compression spring to the floor shift position indicator housing sub-assembly.





11. INSTALL LOWER POSITION INDICATOR HOUSING

(a) Engage the 4 claws to install the lower position indicator housing to the floor shift position indicator housing sub-assembly.





NOTICE:
Make sure that the claws are firmly engaged.

(b) Connect the indicator light wire connector to the floor shift position indicator housing sub-assembly.

Text in Illustration





12. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY

(a) Install the floor shift position indicator housing sub-assembly with the 4 screws.





13. INSTALL SHIFT LOCK RELEASE BUTTON COVER

(a) Install the shift lock release button to the floor shift position indicator housing sub-assembly.