From 08/2009

U660E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE

(a) Coat the O-ring with ATF.





(b) Coat the bolt with ATF.

(c) Install the transmission wire and lock plate to the valve body with the bolt.





Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

(d) Install the transmission wire to the clamp.





(e) Connect the 9 connectors.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation

5. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY Installation

6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT
See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" Installation.