From 08/2009

U660F AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE

(a) Coat the O-ring with ATF.





(b) Coat the bolt with ATF.

(c) Install the transmission wire and lock plate to the valve body with the bolt.





Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

(d) Install the transmission wire to the clamp.





(e) Connect the 9 connectors.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation

5. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY Installation

6. INSTALL TRANSFER ASSEMBLY Installation

7. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT
See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" Installation.