Up to 08/2009

WIPER / WASHER: HEADLIGHT CLEANER SWITCH: INSTALLATION

1. INSTALL HEADLIGHT CLEANER SWITCH ASSEMBLY

(a) Engage the 2 claws to install the headlight cleaner switch assembly as shown in the illustration.





2. REMOVE NO. 1 SWITCH HOLE BASE Installation

3. REMOVE INSTRUMENT PANEL GARNISH LH Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

(a) Inspect the suspension control system Test Mode Procedure.