Up to 08/2009

THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: INSTALLATION

1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Engage the 2 craws and install the certification ECU (smart key ECU assembly).





2. INSTALL ECU INTEGRATION BOX RH Installation

3. CONNECT CONNECTOR HOLDER Installation

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

5. INSTALL PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL GARNISH RH Installation

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Installation.

9. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Installation.

10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. INSPECT SRS WARNING LIGHT

Diagnosis System

15. REGISTER KEY

NOTICE:
If the certification ECU (smart key ECU assembly) is replaced, register the key Engine Immobilizer System.