From 08/2009

AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Display Signal Circuit between Navigation ECU and Multi-display Controller
- Display Signal Circuit between Navigation ECU and Multi-display Controller

DESCRIPTION

This is the display signal circuit from the display and navigation module display to the multi-display controller sub-assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR

(a) Disconnect the display and navigation module display connector.





(b) Disconnect the multi-display controller sub-assembly connector.





(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table