Up to 08/2009

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER (for DVD): REMOVAL

1. EJECT MAP DISC

(a) Disengage the 2 clips and 2 guides, and remove the front console box cover.





(b) Turn the engine switch on (ACC).

(c) Push the "MENU" button on the remote operation controller.

(d) Operate the remote operation controller and select "Info. Phone" on the navigation screen.

(e) Operating the remote operation controller, select "Map Data" on the navigation screen.

(f) Operating the remote operation controller, select "EJECT DVD" on the navigation screen to eject the map disc from the navigation receiver.

(g) Remove the map disc from the navigation receiver.





Text in Illustration





(h) Turn the engine switch off.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

5. REMOVE NO. 2 CONSOLE BOX DUCT Removal

6. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal

7. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) Removal

8. REMOVE REAR CONSOLE BOX ASSEMBLY Removal

9. REMOVE INSTRUMENT PANEL GARNISH LH Removal

10. REMOVE NO. 1 SWITCH HOLE BASE Removal

11. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

12. REMOVE INSTRUMENT PANEL FINISH PANEL Removal

13. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal

14. REMOVE RADIO RECEIVER ASSEMBLY WITH REGISTER Removal

15. REMOVE CONSOLE BOX Removal

16. REMOVE SHIFT LEVER ASSEMBLY Removal

17. REMOVE MULTI-MEDIA MODULE NAVIGATION ASSEMBLY WITH BRACKET

(a) Disengage the 3 clamps.





(b) Disengage the claw and turn back the floor carpet as shown in the illustration.

(c) Disengage the 3 clamps.





(d) Disengage the claw and turn back the floor carpet as shown in the illustration.

(e) Disconnect the 2 connectors.





(f) Remove the 3 bolts.

(g) Disengage the guide and remove the multi-media module navigation assembly with bracket.

18. REMOVE NO. 1 DISC PLAYER BRACKET

(a) Remove the 2 bolts and No. 1 disc player bracket.





19. REMOVE NO. 2 DISC PLAYER BRACKET

(a) Remove the 2 bolts and No. 2 disc player bracket.





20. REMOVE MULTI-MEDIA MODULE NAVIGATION ASSEMBLY

21. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH BRACKET

(a) Pull out the display and navigation module display with bracket to the rear of the vehicle as shown in the illustration.





(b) Disconnect each connector and remove the display and navigation module display with bracket.

22. REMOVE NO. 3 DISC PLAYER BRACKET

(a) Remove the 2 bolts and No. 3 disc player bracket.





23. REMOVE NO. 4 DISC PLAYER BRACKET

(a) Remove the 2 bolts and No. 4 disc player bracket.





24. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY