Towing / Trailer System: Description and Operation
POWER OUTLETS (EXT): TOWING CONVERTER SYSTEM: SYSTEM DIAGRAM
SYSTEM DESCRIPTION
1. INPUT SIGNAL
NOTICE:
* Use only the specified bulbs if replacement is necessary.
* Do not connect other lights, such as fog lights, etc. to the wire harness or trailer.
* Do not splice into the wire harness.
* Do not exceed the allowable rated current of the towing converter relay.
* Never disassemble or modify the parts related to the towing converter system or the vehicle.
* Make sure that there is no short in trailer's lighting circuit.
HINT
* The towing converter system has an Auto Current Cut (ACC) function to prevent the towing converter system from being affected by malfunctions in the trailer. If the towing converter system circuit current exceeds its rated current due to additional lights or short, the towing converter relay interrupts the power supply to the towing converter system.
* When the automatic current cut function activates, reset the towing converter system Initial Inspection and Diagnostic Overview.
* Be sure to turn off the vehicle lights when connecting or disconnecting the trailer.
* Hold the connector on the vehicle and trailer sides when connecting or disconnecting the connector, so that the removal force is not applied to the wire or bracket.
* Be sure to put the cap on the towing socket when the trailer is removed.