From 08/2009

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER ASSEMBLY

(a) Connect each connector.

(b) Engage the 4 claws and 4 guides, and install the rear bumper assembly as shown in the illustration.

HINT
Use the same procedure for the RH side and LH side.

(d) Install the screw.

Torque : 2.5 Nm (26 kgf-cm, 22 in-lbf)

HINT
Use the same procedure for the RH side and LH side.

(e) Engage the 2 rear bumper upper stoppers and install the 2 screws.

Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)

(f) Install the 2 clips.

2. INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

(a) Engage the 2 craws and install the No. 2 luggage compartment side cover protector.

(b) Install the 3 clips and 2 bolts.

(c) Install the 4 screws.

Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)

(d) Install the 2 screws.

Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)

(e) Install a new grommet.

3. INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR Installation