Customize Parameters

DOOR / HATCH: POWER BACK DOOR SYSTEM: CUSTOMIZE PARAMETERS

HINT
The following items can be customized.

NOTICE:
* After confirming whether the items requested by the customer can be customized.
* Be sure to record the current settings before customization.
* When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the condition, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).
1. CUSTOMIZE

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Customize Setting / PSD&PBD operation.

(e) Select the setting by referring to the table below.

PSD&PBD operation





* *1: The warning buzzer that sounds when the power back door is operating cannot be customized (even if this function is set to "OFF", the buzzer will still sound).

* *2: "Not Use" is not a setting that can be selected.

HINT
When either "One Motion" or "One Motion with unlock door" is selected, the other will display "Not Use".

* *3: The power back door assist operation will be linked with the "Back Door Opening Operation" setting of the smart access system with push-button start (for entry function) only when all doors are locked. If "Back Door Opening Operation" is set to "OFF", the power back door assist will not operate even if "PBD Assist Open Operation" is set to "ON" Smart Access System With Push-Button Start (for Entry Function).

* *4: for models with the "PBD Assist Open Operation" customize setting item.