Trunk / Liftgate Lock: Testing and Inspection
DOOR LOCK: BACK DOOR LOCK: INSPECTION
1. INSPECT BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)
(a) Check the operation of the door lock motor.
(1) Move the door lock to the lock position.
(2) Apply battery voltage to the door lock motor and check the operation of the door lock motor.
OK:
(2) If the result is not as specified, replace the back door lock assembly.
(b) Check the operation of the door courtesy switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(1) If the result is not as specified, replace the back door lock assembly.
2. INSPECT BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)
(a) Check the operation of the back door closer motor.
(1) Apply battery voltage to the back door closer motor and check the operation of the back door closer motor.
OK:
Text in Illustration
(1) If the result is not as specified, replace the back door lock assembly.
(b) Check the operation of the latch switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Close Operation
Open Operation
(1) If the result is not as specified, replace the back door lock assembly.
(c) Check the operation of the pawl switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Close Operation
(1) If the result is not as specified, replace the back door lock assembly.
(d) Check the operation of the door courtesy switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(1) If the result is not as specified, replace the back door lock assembly.
(e) Check the operation of the sector switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(1) If the result is not as specified, replace the back door lock assembly.