Up to 08/2009

SEAT: FRONT SEAT ASSEMBLY: DISASSEMBLY

1. REMOVE RECLINING POWER SEAT SWITCH KNOB

(a) Using a moulding remover, disengage the 4 claws and remove the reclining power seat switch knob.





2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

(a) Using a moulding remover, disengage the 2 claws as shown in the illustration.





(b) Using a moulding remover, disengage the 2 claws and remove the slide and vertical power seat switch knob.





3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

(a) Disengage the 2 hooks and remove the 2 rubber bands of the front seatback board from the front seat frame.





(b) Remove the 5 screws.





(c) Disengage the claw and guide.

(d) Disconnect the connector from the front power seat lumbar switch.

(e) w/ Seat Cushion Front Edge Adjustment Function:

(1) Disengage the 2 clamps.





(2) Disconnect the connector from the seat variable cushion switch.

(f) Remove the front seat cushion shield assembly.

4. REMOVE NO. 1 FRONT SEAT CUSHION INNER SHIELD

(a) Remove the 2 screws.





(b) Disengage the 2 guides and remove the No. 1 front seat cushion inner shield from the front seat cushion shield as shown in the illustration.

5. REMOVE LUMBAR SWITCH

(a) Remove the 2 screws and the lumbar switch.





6. REMOVE SEAT VARIABLE CUSHION SWITCH (w/ Seat Cushion Front Edge Adjustment Function)

(a) Remove the 2 screws and the seat variable cushion switch.





7. REMOVE FRONT SEAT INNER BELT ASSEMBLY Removal

8. REMOVE FRONT SEAT CUSHION INNER SHIELD

(a) Remove the screw.





(b) Disengage the claw.

(c) Separate the guide and remove the front seat cushion inner shield as shown in the illustration.





9. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY

(a) Remove the 3 screws.





(b) Disengage the guide.

(c) Disconnect the 2 connectors and remove the position control ECU and switch assembly.





10. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/o Seat Cushion Front Edge Adjustment Function)

(a) Disengage the 6 hooks.





(b) w/o Climate Control Seat System:

(1) Disengage the 5 clamps.





(c) w/ Climate Control Seat System:

(1) Disconnect the 2 connectors.





(2) Disengage the 6 clamps.

(d) for Front Passenger Side:

(1) Disengage the 2 clamps and separate the occupant detection sensor connector.





(e) Using a clip remover, remove the 2 clips.





(f) Disengage each hook and remove the front seat cushion cover with pad.

11. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/ Seat Cushion Front Edge Adjustment Function)

(a) Disengage the 6 hooks.





(b) w/o Climate Control Seat System:

(1) Disengage the 5 clamps.





(c) w/ Climate Control Seat System:

(1) Disconnect the 2 connectors.





(2) Disengage the 6 clamps.

(d) Using a clip remover, remove the 2 clips.





(e) for Front Passenger Side:

(1) Disengage the 2 clamps and separate the occupant detection sensor connector.





(f) Disengage each hook.

(g) Disengage the 4 hooks.





(h) Remove the 2 hog rings.





(i) Remove the front seat cushion cover with pad.

12. REMOVE OCCUPANT CLASSIFICATION ECU (for Front Passenger Side) Removal

13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/o Seat Cushion Front Edge Adjustment Function)

(a) Remove the 2 hog rings.





(b) Remove the 19 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.





14. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/ Seat Cushion Front Edge Adjustment Function)

(a) Remove the 2 hog rings.





(b) Remove the 15 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.





15. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Climate Control Seat System)

(a) Cut off the 30 tack pins that fasten the seat heater, and then remove the front seat cushion heater assembly from the separate type front seat cushion cover.





16. REMOVE TELEVISION BASE COVER CAP (w/ Rear Seat Entertainment System) Removal

17. REMOVE TELEVISION DISPLAY ASSEMBLY WITH COVER (w/ Rear Seat Entertainment System) Removal

18. REMOVE NO. 2 TELEVISION BASE (w/ Rear Seat Entertainment System)

(a) Remove the 4 screws.





(b) Using a clip remover, remove the 5 clips.





(c) Disengage the 2 guides and remove the No. 2 television base.

19. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY

(a) Remove the 2 screws.





(b) Disengage the 2 guides and remove the front seatback board sub-assembly as shown in the illustration.





20. REMOVE FRONT SEATBACK BOARD COVER SUB-ASSEMBLY

(a) Disengage the 2 guides and remove the front seatback board cover sub-assembly.





21. REMOVE FRONT SEAT HEADREST SUPPORT

(a) Disengage the 4 claws and remove the 2 headrest supports.





22. REMOVE FRONT SEATBACK COVER WITH PAD

(a) Disengage the 2 hooks.





(b) Remove the 5 hog rings.





(c) Disengage the 6 hooks as shown in the illustration.





(d) Remove the nut.





(e) Disengage the guide and remove the seatback cover bracket.

(f) Remove the front seatback cover with pad from the seatback frame.

23. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

(a) Remove the 14 hog rings and the separate type front seatback cover from the separate type front seatback pad.





24. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Climate Control Seat System)

(a) Cut off the 12 tack pins that fasten the seatback heater, and then remove the front seatback heater assembly from the separate type front seat cushion cover.





25. REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)

(a) for Driver Side:

(1) Disconnect the connector.





(2) Disengage the 3 clamps.

(b) for Front Passenger Side:

(1) Disconnect the connector.





(2) Disengage the clamp.

(c) Disengage the clamp.





(d) Using a T30 ''TORX'' socket, remove the 6 ''TORX'' bolts and remove the seatback climate control blower and the seatback climate control cover.

26. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY

(a) Disengage the 4 guides and remove the seatback felt.





(b) Disengage the 4 clamps.





(c) Disengage the 2 guides and remove the front seatback spring sub-assembly as shown in the illustration.





(d) Disconnect the connector.





(e) Remove the 2 screws.

(f) Disengage the guide and remove the lumbar support adjuster assembly.

(g) Remove the bush.





27. REMOVE ACTIVE HEADREST UPPER UNIT

(a) Remove the nut [A] and disconnect the cable from the active headrest upper unit as shown in the illustration.





(b) Remove the 4 nuts [B] and the active headrest upper unit.

28. REMOVE ACTIVE HEADREST LOWER UNIT

(a) Remove the 2 nuts and the active headrest lower unit.





29. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER LH

(a) Remove the 2 screws.





(b) Disengage the clamp and remove the side airbag wire harness.

Text in Illustration





(c) Disengage the guide and remove the lower reclining adjuster inside cover LH.

30. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH

(a) Remove the screw.





(b) Disengage the guide and remove the upper reclining adjuster inside cover LH.

31. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER RH

(a) Remove the 2 screws.





(b) Disengage the clamp and remove the side airbag wire harness.

Text in Illustration





(c) Disengage the guide and remove the lower reclining adjuster inside cover RH.

32. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH

(a) Remove the screw.





(b) Disengage the guide and remove the upper reclining adjuster inside cover RH.

33. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH

(a) Remove the screw.





(b) Disengage the hook as shown in the illustration.

Text in Illustration





(c) Disengage the guide and remove the front seat lower cushion shield LH.

34. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH

(a) Remove the screw.





(b) Disengage the hook as shown in the illustration.

Text in Illustration





(c) Disengage the guide and remove the front seat lower cushion shield RH.

35. REMOVE SEAT CUSHION CLIMATE CONTROL DUCT (w/ Climate Control Seat System)

(a) Disengage the 2 clamps (A) in the direction indicated by the arrow.





(b) Disengage the 2 clamps (B) in the direction indicated by the arrow.

(c) Disengage the 2 claws, and remove the seat cushion climate control duct.

36. REMOVE SEAT CUSHION CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)

(a) Disconnect the connector.





(b) Remove the screw.

(c) Pull up the bracket of the seat cushion climate control blower as shown in the illustration.

(d) Disengage the 2 hooks and remove the seat cushion climate control blower.

37. REMOVE SEAT POSITION SENSOR Removal

38. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Climate Control Seat System)

(a) Disconnect the connector.





(b) Disengage the 2 guides and remove the seat heater control sub-assembly.

39. REMOVE FRONT SEAT WIRE

(a) w/ Rear Seat Entertainment System:

(1) Disengage the 5 clamps.





(b) Disconnect the connector.





(c) Disengage the 3 clamps.

(d) Disconnect the 3 connectors.





(e) Disengage the 8 clamps and remove the front seat wire from the front seat frame assembly with adjuster.