Part 2

19. NAVIGATION ECU (DISPLAY AND NAVIGATION MODULE DISPLAY)





(a) Disconnect the connector of the navigation ECU.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





20. POWER MANAGEMENT CONTROL ECU

(a) Disconnect the connector of the power management control ECU.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

for CAN No. 1 Bus Branch Wire
for CAN No. 2 Bus Main Wire
for Power Management Bus Main Wire














21. AFS ECU (HEADLIGHT SWIVEL ECU)

(a) Disconnect the connector of the AFS ECU.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





22. 4WD CONTROL ECU

(a) Disconnect the connector of the 4WD control ECU.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





23. SUSPENSION CONTROL ECU





(a) Disconnect the connector of the suspension control ECU.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





24. SEAT BELT CONTROL ECU





(a) Disconnect the connectors of the seat belt control ECU.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





25. DRIVING SUPPORT ECU





(a) Disconnect the connector of the driving support ECU.

Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





26. PARKING ASSIST ECU

(a) Disconnect the connector of the parking assist ECU.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





27. CLEARANCE WARNING ECU

(a) Disconnect the connector of the clearance warning ECU.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





28. TILT AND TELESCOPIC ECU (MULTIPLEX TILT AND TELESCOPIC ECU)





(a) Disconnect the connector of the multiplex tilt and telescopic ECU.

Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





29. OUTER MIRROR CONTROL ECU LH

(a) Disconnect the connector of the outer mirror control ECU LH.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





30. OUTER MIRROR CONTROL ECU RH

(a) Disconnect the connector of the outer mirror control ECU RH.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





31. POSITION CONTROL ECU LH

(a) Disconnect the connectors of the position control ECU LH.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





32. POWER BACK DOOR ECU (BACK DOOR MOTOR UNIT)

(a) Disconnect the connector of the power back door ECU (back door motor unit).





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance: