Body - Roof Rack Cross Bar Installation Position
L-SB-0025-10April 1, 2010
Roof Rack Crossbar Installation Position
Service Category
Vehicle Exterior
Section
Exterior Panels/Trim
Market
USA
Applicability
Introduction
To prevent the creation of excessive wind noise condition due to improper positioning the position of the roof rack crossbars during PPO/DIO installation has been standardized. Please follow the instructions in this bulletin to ensure proper positioning of the roof rack crossbars.
Parts Information
Warranty Information
Installation Procedure
Install the front crossbar in the most forward position just touching the front stopper and install the rear crossbar in the most rearward position just touching the rear stopper. Updated installation instructions are posted on the Technical Information System (TIS).
Refer to TIS 2010 model year RX 350/ RX 450h Accessory - Accessories Installation - "2010 RX350/450h Crossbar PT278-48105 Rev. D"