Canada - Body - Roof Rack Crossbar Installation
BulletinTSB2801
Issue Date
May 26, 2010
Title
ROOF RACK CROSSBAR INSTALLATION POSITION
Component
BODY
Models
'10 RX350; RX450h
INTRODUCTION:
To prevent the creation of excessive wind noise condition due to improper positioning, the position of the roof rack crossbars during PPO/DIO installation has been standardized. Please follow the instructions in this bulletin to ensure proper positioning of the roof rack crossbars.
APPLICABILITY:
WARRANTY INFORMATION:
PARTS INFORMATION:
REPAIR PROCEDURE:
Install the front crossbar in the most forward position just touching the front stopper and install the rear crossbar in the most rearward position just touching the rear stopper. Updated installation instructions are posted on ETAS.
Refer to ETAS -> Customization -> Installation Instructions -> CIIL0177 2010 model year RX 350 / RX 450h, Cross Bars.
NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.