From 08/2009

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C1300: Skid Control ECU Malfunction
C1300 - Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.





INSPECTION PROCEDURE

PROCEDURE

1. REPLACE SKID CONTROL ECU

(a) Replace the skid control ECU Removal.

(b) Perform initialization and calibration of the linear solenoid valve Initialization.

(c) Perform the zero point calibration of the yaw rate and acceleration sensor Calibration.

(d) Perform the sensor check in the Test Mode procedure Test Mode Procedure.

NEXT -- END