Up to 08/2009

2GR-FXE ENGINE CONTROL: SFI SYSTEM: U0293: Lost Communication with HV ECU
U0293 - Lost Communication with HV ECU

DESCRIPTION

The CAN (Controller Area Network) is a serial data communication system for real-time application. It is a multiplex communication system designed for on-vehicle use that provides a superior communication speed of 500 kbps and a capability to detect malfunctions. Through the combination of the CANH and CANL bus lines, the CAN is able to maintain communication based on differential voltage.





MONITOR STRATEGY





TYPICAL ENABLING CONDITIONS





TYPICAL MALFUNCTION THRESHOLDS





CONFIRMATION DRIVING PATTERN





* Connect the Techstream to the DLC3.

* Turn the power switch on (IG) and turn the Techstream on.

* Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure) DTC Check / Clear.

* Turn the power switch off.

* Turn the power switch on (IG) and turn the Techstream on [A].

* Wait 5 seconds or more.

* Enter the following menus: Powertrain / Engine and ECT / Utility / All Readiness.

* Input the DTC: U0101.

* Check the DTC judgment result [B].





HINT
If the judgment result shows ABNORMAL, the system has a malfunction.

* If the test result is UNKNOWN, enter the following menus: Powertrain / Engine and ECT / Trouble Codes / Pending.

* Read Pending DTCs.

HINT
If a pending DTC is output, the system is malfunctioning.

* If the test result is INCOMPLETE or UNKNOWN and no pending DTC is output, perform a universal trip and check for permanent DTCs DTC Check / Clear.

HINT
* If a permanent DTC is output, the system is malfunctioning.
* If no permanent DTC is output, the system is normal.
INSPECTION PROCEDURE

Refer to the CAN Communication System How to Proceed With Troubleshooting.