Up to 08/2009

AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: DVD Image Signal Circuit between Radio Receiver and Navigation ECU
- DVD Image Signal Circuit between Radio Receiver and Navigation ECU

DESCRIPTION

This is the DVD image signal circuit from the radio receiver assembly to the display and navigation module display.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - DISPLAY AND NAVIGATION MODULE DISPLAY)

(a) Disconnect the radio receiver assembly connector.





(b) Disconnect the display and navigation module display connector.





(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table