Up to 08/2009
INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: DISASSEMBLY
1. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
(a) Remove the 2 screws (D) and No. 1 side defroster nozzle duct.
2. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
(a) Remove the 2 screws (D) and No. 2 side defroster nozzle duct.
3. REMOVE DEFROSTER NOZZLE ASSEMBLY
(a) Remove the 3 screws (D) and defroster nozzle assembly.
4. REMOVE NO. 1 HEATER TO REGISTER DUCT
(a) Remove the 3 screws (D) and No. 1 heater to register duct.
Text in Illustration
5. REMOVE NO. 4 HEATER TO REGISTER DUCT
(a) Remove the 3 screws (D) and No. 4 heater to register duct.
6. REMOVE NO. 3 INSTRUMENT PANEL WIRE
(a) w/ Headup display:
(1) Disengage the connector.
(2) Disengage the clamp.
(b) Disengage the 8 clamps and remove the No. 3 instrument panel wire.
7. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Removal
8. REMOVE NO. 1 METER HOOD RETAINER
(a) Remove the 2 screws (D) and 2 No. 1 meter hood retainers.
9. REMOVE NO. 2 INSTRUMENT PANEL MOUNTING BRACKET
(a) Remove the 2 screws (D) and 2 No. 2 instrument panel mounting brackets.
10. REMOVE COMBINATION METER MIRROR ECU (w/ Headup Display)
(a) Remove the 4 screws (F) and combination meter mirror ECU.
11. REMOVE NO. 1 COMBINATION METER MIRROR BRACKET (w/ Headup Display)
(a) Remove the 2 screws (D) and No. 1 combination meter mirror bracket.
12. REMOVE NO. 2 COMBINATION METER MIRROR BRACKET (w/ Headup Display)
(a) Remove the 2 screws (D) and No. 2 combination meter mirror bracket.
13. REMOVE FRONT PASSENGER SIDE AIRBAG ASSEMBLY Removal
14. REMOVE NO. 1 INSTRUMENT PANEL PIN
(a) Remove the 2 screws (D) and 2 No. 1 instrument panel pins.
15. REMOVE POWER SWITCH
(a) Disengage the 2 claws and remove the power switch as shown in the illustration.
16. REMOVE NO. 1 SIDE DEFROSTER NOZZLE
(a) Disengage the 7 claws and remove the No. 1 side defroster nozzle.
17. REMOVE NO. 2 SIDE DEFROSTER NOZZLE
HINT
Use the same procedure for the No. 2 side defroster nozzle and No. 1 side defroster nozzle.