Up to 08/2009

HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM: Cannot Enter EV Drive Mode
- Cannot Enter EV Drive Mode

DESCRIPTION

EV mode can be entered by selecting EV mode using the steering pad switch assembly (multi-information switch). When EV mode is selected, the EV mode indicator light in the combination meter illuminates.

If any of the following conditions are not met, EV mode may not be turned on or the mode may be cancelled. (A buzzer sounds to indicate that the transition to EV mode is cancelled and a message is displayed on multi-information display.)





INSPECTION PROCEDURE

PROCEDURE

1. ASK ABOUT VEHICLE CONDITION

(a) Check if a buzzer sounded and a message was displayed on the multi-information display when attempting to enter EV mode.

Result:





HINT
If a buzzer sounds and a message is displayed on multi-information display, one or more of the EV mode entry conditions have not been met. Check that all of the EV mode entry conditions have been met before pressing the EV mode switch.

B -- COMPLETED
A -- Continue to next step.

2. READ VALUE USING TECHSTREAM (BUS CHECK)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Enter the following menus: System Select / CAN Bus Check.

Result:





B -- GO TO CAN COMMUNICATION SYSTEM

A -- GO TO COMBINATION METER SYSTEM