From 08/2009

LIGHTING (EXT): HEADLIGHT ASSEMBLY (except LED Headlight): INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect each connector.

(b) Engage the clamp.





(c) Install the headlight assembly with the 3 bolts and screw.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. INSTALL HOOD CENTER CUSHION Installation

4. INSTALL COOL AIR INTAKE DUCT SEAL Installation

5. INSTALL ENGINE ROOM SIDE COVER Installation

6. INSTALL ENGINE ROOM SIDE COVER LH Installation

7. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSTALL REAR DECK FLOOR BOX Installation

10. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT Headlight Assembly (except LED Headlight)

11. PREPARE FOR HEADLIGHT AIMING (Using a headlight aim test machine) Headlight Assembly (except LED Headlight)

12. PREPARE FOR HEADLIGHT AIMING (Using a screen) Headlight Assembly (except LED Headlight)

13. INSPECT HEADLIGHT AIMING Headlight Assembly (except LED Headlight)

14. ADJUST HEADLIGHT AIMING Headlight Assembly (except LED Headlight)

15. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT Adjustments

16. PREPARE FOR FOG LIGHT AIMING Adjustments

17. INSPECT FOG LIGHT AIMING Adjustments

18. ADJUST FOG LIGHT AIMING Adjustments