Up to 08/2009

FRONT SUSPENSION: FRONT ACTIVE STABILIZER CONTROL ACTUATOR: REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

HINT
Refer to the procedure up to Remove Engine Assembly with Transaxle Removal.

2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH Removal

3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT
Perform the same procedure as the LH side.

4. REMOVE FRONT NO. 1 STABILIZER BRACKET LH

(a) Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.





5. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT
Perform the same procedure as the LH side.

6. REMOVE FRONT ACTIVE STABILIZER CONTROL ACTUATOR ASSEMBLY

(a) Remove the front active stabilizer control actuator assembly from the front frame assembly.

NOTICE:
* Take care not to damage the front active stabilizer control actuator assembly wire harness.
* Avoid any impact to the front active stabilizer control actuator assembly.
* Do not drop the active stabilizer control actuator assembly. If it is dropped, replace it with a new one.
7. REMOVE FRONT NO. 2 STABILIZER BRACKET LH

(a) Remove the front No. 2 stabilizer bracket LH from the front No. 1 stabilizer bar bushing.





8. REMOVE FRONT NO. 2 STABILIZER BRACKET RH

HINT
Perform the same procedure as the LH side.

9. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING

(a) Remove the 2 front No. 1 stabilizer bar bushings from the front active stabilizer control actuator assembly.