Operation CHARM: Car repair manuals for everyone.

Up to 08/2009





P313 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSTALLATION

1. INSTALL SHIFT LEVER ASSEMBLY

NOTICE:
Check that the park/neutral position switch and the shift lever are in neutral.

(a) Turn the lock nut of the transmission control cable counterclockwise. While holding the lock nut, push in the stopper.





Text in Illustration





(b) Connect the outer part of the transmission control cable to the shift lever retainer.





Text in Illustration





NOTICE:
The lock nut is fully seated against the shift lever retainer.

(c) Install the transmission control cable end to the shift lever assembly.





NOTICE:
* Install the floor shift cable with the uneven surface facing up.
* Install the cable end all the way to the base of the pin.
(d) Install the shift lever assembly with the 4 nuts.





Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)

(e) Connect the 3 clamps to the shift lever assembly.

(f) Connect the 2 connectors.

2. INSTALL CONSOLE BOX Installation

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

4. INSTALL INSTRUMENT PANEL FINISH PANEL Installation

5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

6. INSTALL NO. 1 SWITCH HOLE BASE Installation

7. INSTALL INSTRUMENT PANEL GARNISH LH Installation

8. INSTALL REAR CONSOLE BOX ASSEMBLY Installation

9. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) Installation

10. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY Installation

11. INSTALL NO. 2 CONSOLE BOX DUCT Installation

12. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

15. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

(a) Inspect the suspension control system Test Mode Procedure.

16. INSPECT SHIFT LEVER POSITION Adjustments

17. ADJUST SHIFT LEVER POSITION Adjustments

18. INSPECT SHIFT LEVER OPERATION Adjustments

19. INSTALL REAR DECK FLOOR BOX Installation