Up to 08/2009

AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Display Mode Signal Circuit between Multi-display Controller and Television Display Assembly
- Display Mode Signal Circuit between Multi-display Controller and Television Display Assembly

DESCRIPTION

This is the display mode signal circuit from the multi-display controller sub-assembly to the television display assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER - TELEVISION DISPLAY ASSEMBLY)

(a) Disconnect the multi-display controller sub-assembly connector.





(b) Disconnect the television display assembly RH connector.





(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table