Up to 08/2009

AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: Sound Signal Circuit between Multi-display Controller and Head-phone Terminal
- Sound Signal Circuit between Multi-display Controller and Head-phone Terminal

DESCRIPTION

This is the sound signal circuit from the multi-display controller sub-assembly to the headphone terminal.

WIRING DIAGRAM

INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY - HEADPHONE TERMINAL)

(a) Disconnect the multi-display controller sub-assembly connector.

(b) Disconnect the headphone terminal LH connector.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table