Up to 08/2009

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER (for DVD): INSTALLATION

1. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY

2. INSTALL NO. 4 DISC PLAYER BRACKET

(a) Install the No. 4 disc player bracket with the 2 bolts.





3. INSTALL NO. 3 DISC PLAYER BRACKET

(a) Install the No. 3 disc player bracket with the 2 bolts.





4. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH BRACKET

(a) Connect each connector.

(b) Install the display and navigation module display with bracket as shown in the illustration.





5. INSTALL MULTI-MEDIA MODULE NAVIGATION ASSEMBLY

6. INSTALL NO. 2 DISC PLAYER BRACKET

(a) Install the No. 2 disc player bracket with the 2 bolts.





7. INSTALL NO. 1 DISC PLAYER BRACKET

(a) Install the No. 1 disc player bracket with the 2 bolts.





8. INSTALL MULTI-MEDIA MODULE NAVIGATION ASSEMBLY WITH BRACKET

(a) Engage the guide.





(b) Install the multi-media module navigation assembly with bracket with the 3 bolts.

(c) Connect the 2 connectors.

(d) Engage the claw and 3 clamps to install the floor carpet to the original position.





(e) Engage the claw and 3 clamps to install the floor carpet to the original position.





9. INSTALL SHIFT LEVER ASSEMBLY Installation

10. INSTALL CONSOLE BOX Installation

11. INSTALL RADIO RECEIVER ASSEMBLY WITH REGISTER Installation

12. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

13. INSTALL INSTRUMENT PANEL FINISH PANEL Installation

14. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

15. INSTALL NO. 1 SWITCH HOLE BASE Installation

16. INSTALL INSTRUMENT PANEL GARNISH LH Installation

17. INSTALL REAR CONSOLE BOX ASSEMBLY Installation

18. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) Installation

19. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY Installation

20. INSTALL NO. 2 CONSOLE BOX DUCT Installation

21. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

22. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

23. INSERT MAP DISC

24. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

25. INSTALL REAR DECK FLOOR BOX Installation

26. INSPECT SHIFT LEVER POSITION

Installation

27. ADJUST SHIFT LEVER POSITION

Installation

28. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

(a) Inspect the suspension control system Test Mode Procedure.