Up to 08/2009

DOOR / HATCH: BACK DOOR CLOSER SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Back Door / Trouble Codes.

HINT
Refer to the Techstream operator's manual for further details.

(e) Check DTCs and then write them down.

(f) Confirm the details of the DTCs Back Door Closer System.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Back Door / Trouble Codes / Clear.

HINT
Refer to the Techstream operator's manual for further details.

(e) Clear the DTCs by following the directions on the Techstream screen.