Up to 08/2009

2GR-FXE LUBRICATION: LUBRICATION SYSTEM: ON-VEHICLE INSPECTION

1. CHECK ENGINE OIL LEVEL

(a) Warm up and stop the engine, then wait for 5 minutes. The oil level should be between the low level and full level marks on the engine oil level dipstick.

If the engine oil level is low, check for leakage and add oil up to the full level mark.

NOTICE:
Do not add engine oil to above the full level mark.

2. CHECK ENGINE OIL

(a) Check the engine oil for deterioration, water contamination, discoloring or thinning.

If the condition is visibly poor, replace the engine oil and engine oil filter.

3. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Remove the oil pressure switch Removal.

(b) Install the oil pressure gauge with the adapter.





(c) Put the engine in inspection mode Component Tests and General Diagnostics.

(d) Warm up the engine.

(e) Check the oil pressure.

Standard Oil Pressure:





(f) If the oil pressure is not as specified, check the oil pump Testing and Inspection.

(g) Remove the oil pressure gauge with the adapter.

(h) Install the oil pressure switch Installation.